D) ACCESS TO ALL DRIVE PARAMETERS USING EXPERT LIST.

THE FOLLOWING ARE ITS FEATURES A) COMPLETE CONFIGURATION OF THE DRIVE ALONG WITH MOTOR DETAILS, ENCODER DETAILS, PROFIBUS ADDRESS B) MASTER CONTROL OF DRIVE USING PC. 3) SIMOCOMU THIS SOFTWARE IS USED TO COMMUNICATE WITH THE 611U, 611UE DRIVES. SELECT THE FOLLOWING SETTINGS: SELECT 802D PPI AS THE INTERFACE FOR COMMUNICATION IF REQUIRED, GOTO PROPERTIES AND CHANGE THE BAUDRATE AND COMPORT PLS GIVE CONNECT ON IN THE PLC CONNECT PAGE OF 802D BEFORE ATTEMPTING TO ESTABLISH CONNECTION WITH 802D THE CABLE CONFIGURATION IS SAME AS THAT OF RS232. A STANDARD COMMUNICATIONS SETTING IS GIVEN BELOW BAUDRATE: BITS PER SEC STOP BITS: 1 PARITY : EVENģ FOR COMMUNICATING WITH 802D PLC, CONFIGURE THE PARAMETERS IN THE COMMUNCATIONS WINDOW IN THE SOFTWARE. THIS CANNOT BE USED WITH STANDALONE S7200. A STANDARD SETTING OF RS232 IS GIVEN BELOW BAUDRATE: BITS PER SEC (CAN BE CHANGED) STOPBITS: 1 DATABITS: 8 PARITY: NONE FLOW CONTROL: RTS/CTS (COMPULSARY)Ģ CABLE CONFIGURATION: ALL CONNECTORS ARE FEMALE (9PIN AND 25 PIN) 2) PLC PROGRAMMING TOOL (802D) THIS SOFTWARE COMES WITH ALL THE TOOLBOX VERSIONS OF 802D THIS SOFTWARE IS USED TO UPLOAD AND DOWNLOAD PLC PROGRAMS FROM THE INTEGRATED S7200 OF 802D ONLY. THE COMMUNICATION BAUDRATE CAN BE SET BOTH IN PC AND THE CNC THE CONDITION BEING THAT THEY SHOULD BE MATCHED. THIS FEATURE IS ADVANTAGEOUS WHEN WE WANT TO SEND ALL THE STANDARD CYCLES AT ONCE INSTEAD OF SENDING THEM ONE BY ONE. WITH THE HELP OF THIS FEATURE, MULTIPLE NUMBER OF FILES CAN BE SELECTED AT A SINGLE TIME TO BE DOWNLOADED TO CNC. ALONG WITH THE ABOVE MENTIONED FEATURES, PCIN HAS ONE ADDITIONAL ADVANTAGE OF TAGGING THE FILES. ALL THE ABOVE POINTS ARE ALSO VALID FOR PCIN. PCIN IS THE OLDER DOS BASED SOFTWARE WHICH DOES THE SAME JOB AS WINPCIN. ALL OTHER DATA LIKE MACHINE DATA, PLC ALARM TEXT PC, PARTPROGRAMS, STANDARD CYCLES, USERCYCLES ARE TO BE TAKEN IN TEXT FORMAT. THE SOFTWARE IS USED TO TAKE DATA BACKUP (ARCHIVES, PARTPROGRAMS,) IN EITHER TEXT OR BINARY FORMAT ARCHIVES (STARTUP DATA, PLC APPLICATION PC) ARE TO BE TAKEN ONLY IN BINARY FORMAT.

IT REQUIRES A STANDARD RS232 CABLE WITH HANDSHAKE SIGNALS. 1 A MANUAL ON SIEMENS SOFTWARE AND CABLE CONFIGURATIONS 802D 1) WINPCIN, PCIN THIS SOFTWARE COMES WITH ALL TOOLBOX VERSIONS OF 802D THIS SOFTWARE WORKS ON RS232 PROTOCOL.

Pcin software download